SECTION BRIEF - This section outlines procedures necessary for admittance
to The Organization of Strategic Intelligence’s high security complex (shown below).

Diagram 0.2 - OSI complex
Diagram 1.1.1 illustrates the components of OSl’s Security Entrance Console
located in the recess to the right, of the complex entryway.

Diagram 1.1.1 - OSI Security Gate
NOTE: Refer to subsection 1.2 "STANDARD ADMITTANCE’ if you already
have an imprinted ID Disc.
New personnel are required to procure a blank ID Disc (also referred to as a
diskette) suitable for imprinting personal identification data. Once imprinted,
your personal ID Disc is used to gain admittance to the OSI Security Complex. Your
ID Disc is also used for electronic storage of ail your records and files, including
your current clearance level and project data. You are expected to keep your ID
Disc on your person at all times.
As a new employee of OSI, the ID Disc imprinting process automatically transfers
special orientation information to your ID Disc. This information will be used in
conjunction with this orientation guide for demonstration purposes. If you should
ever need a new ID Disc, use the NEW option.
NOTE: Throughout this Orientation Guide, any specific instructions
which you should follow will be set off by a “>>>” symbol. Any Instructions which
are preceded by this symbol should be carried out immediately.
| >>> |
To imprint your personal ID Disc (also called initializing or formatting),
click on the control button labeled ORIENT (refer to the OSI/CACD System
2 Reference Card for keyboard control of the security console). |
| >>> |
lf your terminal is not equipped with a High Capacity Storage Device,
(also known as a hard drive), then insert your blank ID Disc into any access
slot (also referred to as disk drive.) |
| >>> |
Click on the SLOT button to select the location of your Employee ID
Disc. At this point the File Retrieval Panel (FRP) will appear. Please select
the access slot Containing the disc to be used for imprinting (refer to
your OSI/CACD System 2 Reference Card for keyboard control of the FRP). |
| >>> |
lf your terminal is equipped with a High Capacity Storage Device, then
your ID information can be stored on it by selecting that device. |
Note: The High Capacity Storage Device will not be imprinted (or formatted).
The ID information will be placed in to a separate folder, thus allowing multiple
users to access the same High Capacity Storage Device. Also note that any use of
the term “ID Disc” in the OMEGA manuals refers to your ID FOLDER. All of your personnel
files are stored in your ID folder.
| >>> |
Enter your name and desired password when prompted to do so on the console
screen. |
Leave the password blank if you do not care to protect against unauthorized
access to the data on your, ID Disc.
WARNING: Once entered, your password is inaccessible.
Without your password you will not be able to use your ID Disc to gain admittance
to OSI and all data stored on your ID Disc will be lost.
| >>> |
After your name and password are entered, follow the instructions on
the console screen to begin imprinting. |
After the initial imprinting stage, your retina pattern is recorded for future
identity verification. Admittance to OSI requires password and retina pattern verification
from your imprinted ID Disc.
| >>> |
To record your retina pattern, look into the retinal scanner (refer
to Diagram 1.1.1 for location of retinal scanner on security console) and
follow the instructions on the console screen. |
This completes the NEW PERSONNEL ADMITTANCE procedure. Entry to OSI will be
approved pending the correct execution of this procedure and the proper cross-referencing
of your data with OSI's NEW PERSONNEL files. You may skip the next subsection (1.2
STANDARD ADMITTANCE). It deals with personnel admittance using existing ID Discs.
NOTE: Refer to subsection 1.1 NEW PERSONNEL ADMITTANCE if you do
not have an imprinted personal ID Disc. Admittance to OSI requires password and
retina pattern verification from your personal ID Disc.
| >>> |
To initiate the verification process, press the VERIFY button (refer
to the OSI/CACD System 2 Reference Card for keyboard control of the security
console). |
| >>> |
Use the LOCATE button to select the access slot in which your ID Disc
is located. If you are using a High Capacity Storage Device, then you must
also select which employee is to be verified. |
| >>> |
Enter your password when prompted to do so. Leave the password blank
if you did not enter one when your ID Disc was imprinted. Follow the instructions
on the console screen to perform verification. |
Once your password has been verified, you will be prompted for retina pattern
verification.
| >>> |
Look into the retinal scanner and follow the instructions on the console
screen to initiate verification. |
This completes the STANDARD ADMITTANCE procedure. Entry to OSI will be approved
pending the correct execution of this procedure and the verification of your password
and retina pattern with that imprinted on your personal ID Disc.
Next - SECTION 2
|