|
|
 |
 |
 |
 |
 |
SECTION BRIEF- The Combat Simulation Module (CSM) and the Cybertank Test Module
(CTM) have a limited amount of memory available f o r processing simulations. Also,
each cybertank in the simulation must be authorized for use.
When loading a simulation, the CSM and CTM are limited by the amount of memory
available. In rare cases, there is not enough memory available to load all of the
cybertanks In the simulation design. You will be notified when these modules are
unable to load all tanks in a design. The only recourse is to redesign the simulation
using fewer tanks. When a memory problem occurs, the active module will abort and
you will be transferred to the External Control Module (ECM).
The battlefield design and all cybertanks included in a simulation design must
reside on the same disc when using the CSM or CTM. If either the battlefield, or
any one of the cybertanks are not found on the disc, you will be notified via the
terminal. In a situation such as this, the CSM and CTM will abort and transfer you
to the External Control Module (ECM).
To rectify this problem, you can either redesign the simulation using the Simulation
Design Module (SDM), or copy the cybertanks and battlefield onto the same disc with
the Data Duplication Module (DDM).
The CTM requires that the cybertank to be tested to have been authorized by the
current employee. lf you attempt to test a cybertank using an unauthorized cybertank
design, the Cybertank Not Authorized message is displayed. The Cybertank Not Authorized
error message also appears during Clearance Evaluation if the cybertank Selected
is not authorized by the current employee. To resolve this problem, authorize the
cybertank using the Design Control Module (DCM).
|
 |
|
 |
 |
 |
|